Celtic Knot Tutorial (pen)

For the second part of my two-part tutorial, here is how I make a Celtic Knot in my pen blanks using my new jig. 1. Pen Blank (Curly Eucalyptus from woodturningz.com) 2. Walnut veneer (planed down to thickness of saw kerf) 3. Alumium Foil 4. 1 min epoxy 5. Celtic Knot Jig (See previous tutorial) … Continue reading →

Celtic Knot Jig

I decided that I would create a 2 part tutorial on how I plan to make the celtic knot design in a pen blank. I have tried this once before, but was semi-unsucesseful due to the following reasons. 1) First, I used my homemade 45-degree miter sled from Steve Ramseys tutorial on youtube. While this … Continue reading →